User Manual Q&AAnswer
Oct 30, 2024 - 03:03 AM
To set up the wireless connectivity on the Epson WF-7620 Wireless Printer with Scanner, please follow these steps:
1. Ensure that your printer is turned on and connected to a power source.
2. On the printer's control panel, navigate to the "Setup" or "Settings" menu.
3. Select the "Network Settings" or "Wireless LAN Setup" option.
4. Choose the "Wireless LAN Setup Wizard" or "Wi-Fi Setup" option.
5. The printer will search for available wireless networks. Select your network from the list.
6. If your network is secured with a password, enter the password using the printer's control panel or the on-screen keyboard.
7. Once the printer is connected to your wireless network, it will display a confirmation message.
8. To verify the wireless connection, you can print a network status sheet from the printer's control panel. This sheet will provide information about the printer's IP address and network connection status.
9. You can now proceed to install the printer drivers on your computer or mobile device. Refer to the user's guide or the Epson website for instructions on driver installation.
Please note that the exact steps may vary slightly depending on the printer's firmware version and user interface. For detailed instructions and illustrations, please refer to the User's Guide provided with the printer or consult the online version of the guide.
Add New Comment