How do I install the Legrand 2087WCCD4 Radiant Self-Test GFCI Outlet? (Legrand 2087WCCD4 Radiant Self-Test GFCI Outlet User Manual)

Answer

manuals.plus

Oct 30, 2024 - 02:23 AM

Installing the Legrand 2087WCCD4 Radiant Self-Test GFCI Outlet is a relatively straightforward process. Here are the step-by-step instructions:

1. Turn off the power: Before starting the installation, ensure that the power to the circuit you'll be working on is turned off at the circuit breaker panel.

2. Remove the old outlet (if applicable): If you're replacing an existing outlet, carefully remove it from the electrical box by unscrewing the mounting screws and disconnecting the wires.

3. Prepare the wires: Strip about 3/4 inch of insulation from the ends of the black (hot), white (neutral), and green or bare copper (ground) wires.

4. Connect the wires: Connect the black wire to the brass-colored xxxx terminal marked "LINE" on the GFCI outlet. Connect the white wire to the silver-colored xxxx terminal marked "LINE." Connect the green or bare copper wire to the green xxxx terminal marked "GROUND."

5. Mount the outlet: Carefully tuck the connected wires into the electrical box and align the GFCI outlet with the xxxx holes in the box. Secure the outlet to the box using the provided screws.

6. Test the outlet: After the installation is complete, turn on the power at the circuit breaker panel. Press the "RESET" button on the GFCI outlet. The "RESET" button should stay in the popped-out position. You can then plug in a device and press the "TEST" button. The device should lose power, indicating that the GFCI outlet is functioning correctly.

Please note that these instructions are a general guide, and it's always recommended to consult the specific installation instructions provided with the Legrand 2087WCCD4 Radiant Self-Test GFCI Outlet for any additional details or considerations.