User Manual Q&AAnswer
Oct 30, 2024 - 02:02 AM
To set the clock on the Taylor 5873 Digital Super Loud Timer, follow these steps:
1. Slide the switch on the bottom of the timer to CLOCK SET.
2. Press the "H" button to set the hour (1-11 AM/PM or 24-hour mode).
3. Press the "M" button to set the minutes.
4. Press the "►■" button to confirm the time setting.
5. Slide the switch back to CLOCK or TIMER.
To program the timer on the Taylor 5873 Digital Super Loud Timer, follow these steps:
1. Slide the switch to TIMER.
2. Press the "H" and "M" buttons to set the desired hours and minutes.
3. Press the "►■" button to start the timer countdown.
4. To pause the timer, press the "►■" button. Press it again to resume timing.
5. To reset the timer, press the "►■" button to pause, then press and hold it for 3 seconds.
6. When the countdown reaches zero, the alarm will sound at 95 decibels. Press any button to stop the alarm. The timer has a memory function and will display the previously set time.
7. The timer can also count up. Press the "►■" button when '00:00 00' is displayed, and the timer will count up, showing "TIMER" on the LCD.
8. If the slide switch is in CLOCK or CLOCK SET mode and the countdown reaches zero, the alarm will sound and "TIMER DONE" will blink. Press any button to stop the alarm. The count-up time will display when the switch is moved to TIMER. Press the "►■" button to recall the memory function. Press and hold the "►■" button for 3 seconds to reset.
9. The maximum timer allowance is '23H 59M 00S'.
Please refer to the Taylor 5873 Digital Super Loud Timer User Manual for more details and illustrations.
Add New Comment