User Manual Q&AAnswer
Oct 30, 2024 - 01:38 AM
To assemble the Hamilton Beach 67702 Big Mouth Juice Extractor, follow these steps:
1. Place the Strainer Bowl on top of the Motor Base.
2. Insert the Strainer Basket into the Strainer Bowl, pressing it down firmly to latch into position.
3. Position the Juicer Cover over the Strainer Bowl, aligning the Feed Chute with the Strainer Basket.
4. Lower the Juicer Cover into place.
5. Raise the Locking Latches on either side of the Juicer Cover to lock it into place.
6. Insert the Pulp Container into position by tilting it slightly.
7. Place a glass or container under the Juice Spout to collect the juice.
8. Slide the Food Pusher down the Feed Chute, aligning the groove in the Food Pusher with the small ridge on the inside of the top of the Feed Chute.
To disassemble the Hamilton Beach 67702 Big Mouth Juice Extractor, follow these steps:
1. Turn the Juice Extractor OFF and unplug it from the power outlet.
2. Allow the Strainer Basket to stop turning.
3. Release the Locking Latches on either side of the Juicer Cover.
4. Move the Locking Latches down.
5. Lift off the Juicer Cover.
6. Slide the Pulp Container away from the Motor Base to remove it.
7. Lift off the Strainer Bowl with the Strainer Basket still in place.
8. To remove the Strainer Basket, turn the Strainer Bowl upside down and carefully remove the Strainer Basket. It is recommended to do this over a sink.
Please refer to the Hamilton Beach 67702 Big Mouth Juice Extractor User Manual for more detailed instructions and illustrations.
Add New Comment