User Manual Q&AAnswer
Oct 29, 2024 - 11:21 PM
To set the time on the Taylor 5853 timer, follow these steps:
1. Remove the timer from its packaging.
2. Locate the battery compartment and ensure the 1LR44 battery is properly installed.
3. Press the "MIN" (minute) button to set the desired number of minutes. For example, if you want to set the timer for 5 minutes, press the "MIN" button until the display shows '05'.
4. Press the "SEC" (second) button to set the desired number of seconds. For example, if you want to set the timer for an additional 30 seconds, press the "SEC" button until the display shows '30'.
5. After setting the desired time, press the "START/STOP" button to begin the countdown.
The timer will now count down the time you set. If you need to pause the countdown at any point, press the "START/STOP" button once. Press it again to resume. When the set time has elapsed, the timer will emit an extra-loud alarm.
For more detailed instructions and information on additional features, please refer to the Taylor 5853 Easy Digital Timer User Manual.
Add New Comment