User Manual Q&AAnswer
Oct 29, 2024 - 11:19 PM
To connect the Kodak Hero 6.1 Wireless Printer with Scanner to your computer or mobile device, follow these steps:
1. Ensure that your printer is powered on and properly set up in your desired location.
2. On your computer or mobile device, make sure that you are connected to a Wi-Fi network.
3. Locate the Wi-Fi button on the printer. It is usually located on the control panel or near the display screen.
4. Press the Wi-Fi button on the printer. This will activate the printer's wireless setup mode.
5. On your computer or mobile device, go to the Wi-Fi settings and search for available networks.
6. Look for the network name (SSID) that matches the name of your printer. It may appear as "Kodak Hero 6.1" or a similar variation.
7. Select the printer's network from the list of available networks and enter the password if prompted. The default password can be found in the printer's user guide or on a sticker attached to the printer.
8. Once connected, open a web browser on your computer or mobile device and enter the printer's IP address. The IP address can be found in the printer's user guide or by printing a network configuration page from the printer's control panel.
9. The web browser will display the printer's web interface. Follow the on-screen instructions to complete the setup process.
10. Once the setup is complete, you should be able to print wirelessly from your computer or mobile device. You can also use the scanning function by installing the necessary scanning software on your computer or using the scanning app on your mobile device.
For more detailed instructions and troubleshooting tips, please refer to the user guide provided with the Kodak Hero 6.1 Wireless Printer with Scanner.
Add New Comment