User Manual Q&AAnswer
Oct 29, 2024 - 11:04 PM
To connect the Brother MFC-J450DW printer to your Wi-Fi network, please follow these steps:
1. Make sure your Wi-Fi network is active and that you have the network name (SSID) and password available.
2. On the printer's control panel, press the "Menu" button.
3. Use the arrow keys to navigate to the "Network" option and press "OK".
4. Select the "WLAN" option and press "OK".
5. Choose the "Setup Wizard" option and press "OK".
6. The printer will search for available Wi-Fi networks. Select your network from the list and press "OK".
7. If prompted, enter your Wi-Fi network password using the printer's keypad. Use the arrow keys to navigate through the characters and the "OK" button to confirm each character.
8. Once the password is entered, the printer will attempt to connect to your Wi-Fi network. This process may take a few moments.
9. Once the connection is established, the printer will display a confirmation message. Press "OK" to finish the setup process.
10. To verify that the printer is connected to your Wi-Fi network, you can print a network configuration page. Press the "Menu" button, navigate to the "Network" option, and select "Print Reports". Choose the "Network Configuration" option to print the page.
If you continue to experience difficulties connecting your printer to Wi-Fi, please consult the user's guide for troubleshooting tips or contact Brother customer support for further assistance.
Add New Comment