User Manual Q&AAnswer
Oct 29, 2024 - 10:08 PM
To pair the JAKCOM R5 Smart Ring with your smartphone, follow these steps:
1. Install the dedicated app: Before pairing, make sure to install the dedicated app for the smart ring on your smartphone. You can find the app in the respective app store for your device (e.g., Google Play Store for Android, App Store for iOS).
2. Enable NFC on your smartphone: Go to your smartphone's settings and ensure that NFC is enabled. This is usually found in the "Connections" or "Wireless & Networks" section of the settings menu.
3. Open the app and follow the on-screen instructions: Launch the dedicated app for the smart ring on your smartphone. The app will guide you through the pairing process. Follow the on-screen instructions to complete the pairing.
4. Place the smart ring close to the NFC area of your smartphone: Once the app prompts you to pair the smart ring, place the smart ring close to the NFC area of your smartphone. The NFC area is usually located on the back of the device or near the top.
5. Wait for the pairing confirmation: After placing the smart ring close to the NFC area, wait for the app to detect and pair with the smart ring. Once the pairing is successful, you will receive a confirmation message on your smartphone.
Note: The specific steps may vary depending on the model of your smartphone and the app provided by JAKCOM for the smart ring. Refer to the user manual and app instructions for any additional details or troubleshooting tips.
For more information and detailed instructions, please refer to the user manual and product documentation provided with your JAKCOM R5 Smart Ring.
Add New Comment