User Manual Q&AAnswer
Oct 29, 2024 - 09:54 PM
To pair the AMOVAN Smart Ring-Z1 Health Tracker with your smartphone, please follow these steps:
1. Charge the ring: Connect the ring to the magnetic charging cable and plug it into a power source. The red indicator light will flash during charging, and the green indicator light will flash and then turn off when fully charged.
2. Download the smart ring app: Scan the QR code provided in the manual to download and install the app on your smartphone. Make sure your smartphone meets the compatibility requirements (Android 5.0 and above; iOS 10.0 and above).
3. Open the app: Open the "Amovan Ring" app on your smartphone.
4. Add the device: In the app, click on "Add Device" to start the pairing process.
5. Select the device: Choose the device you want to connect to from the list of available devices.
6. Follow the on-screen instructions: The app will guide you through the pairing process. Make sure the Bluetooth and positioning functions of your smartphone are turned on, and keep the ring close to your smartphone during the pairing process.
7. Complete the pairing: Once the pairing is successful, you will see a confirmation message on the app.
Note: It is recommended to keep the ring battery above 20% before pairing to avoid pairing failure due to low battery.
Add New Comment