User Manual Q&AAnswer
Oct 29, 2024 - 06:05 AM
To connect the Epson DS-40 scanner to your computer, you can follow these steps:
1. Ensure that your computer meets the minimum system requirements for the scanner, which is Windows 8 or later.
2. Power on the scanner by pressing the power button.
3. On your computer, make sure that the Wi-Fi is enabled and connected to the same network that you want to connect the scanner to.
4. Locate the Wi-Fi button on the scanner. Press and hold the Wi-Fi button for about 3 seconds until the Wi-Fi light starts flashing.
5. On your computer, open the Wi-Fi settings and look for the network name starting with "EPSON." Select this network to connect to the scanner.
6. Once connected, open a web browser on your computer and enter the IP address provided in the scanner's user manual or on the scanner's LCD screen.
7. You will be directed to the Epson ScanSmart software download page. Follow the on-screen instructions to download and install the software on your computer.
8. Once the software is installed, launch it and select the DS-40 scanner from the list of available scanners.
9. You can now start scanning documents directly to your computer using the Epson ScanSmart software.
For more detailed instructions and troubleshooting tips, please refer to the user's guide provided with the scanner.
Add New Comment