User Manual Q&AAnswer
Oct 29, 2024 - 05:52 AM
To connect the Adesso 4100B Wireless 1D Barcode Scanner to your device, please follow these steps:
1. Ensure that the scanner is charged or has fresh batteries installed.
2. Turn on the scanner by pressing and holding the power button until the LED indicator lights up.
3. On your device (Android, iOS, Windows, or Mac), go to the Bluetooth settings.
4. Enable Bluetooth on your device if it is not already enabled.
5. On the scanner, press and hold the Bluetooth pairing button until the LED indicator starts flashing.
6. On your device, search for available Bluetooth devices.
7. Select the Adesso 4100B from the list of available devices.
8. If prompted, enter the pairing code (usually 0000 or 1234) on your device.
9. Once the pairing is successful, the LED indicator on the scanner will stop flashing and remain solid.
10. Your Adesso 4100B Wireless 1D Barcode Scanner is now connected to your device and ready to use.
For more detailed instructions and troubleshooting tips, please refer to the User Guide provided with the scanner. You can access the User Guide by clicking on the "User Guide" link above.
Note: The exact steps may vary slightly depending on your device's operating system version. Please consult the User Guide for specific instructions tailored to your device.
Add New Comment