User Manual Q&AAnswer
Oct 29, 2024 - 05:43 AM
To connect the Epson ET-3600 Wireless Printer with Scanner to your Wi-Fi network, please follow these steps:
1. Ensure that your Wi-Fi network is set up and working properly. Make sure you have the network name (SSID) and password available.
2. Power on the printer and wait for it to initialize.
3. On the printer's control panel, press the Home button.
4. Use the arrow buttons to navigate to the Wi-Fi Setup option and press the OK button.
5. Select Wi-Fi Setup Wizard and press OK.
6. The printer will start searching for available Wi-Fi networks. Wait for the list of networks to appear on the screen.
7. Use the arrow buttons to select your Wi-Fi network from the list and press OK.
8. If prompted, enter your Wi-Fi network password using the numeric keypad on the control panel. Use the arrow buttons to navigate between characters and the OK button to confirm each character.
9. Once you have entered the password, press OK to confirm.
10. The printer will attempt to connect to your Wi-Fi network. This may take a few moments. Once the connection is established, the Wi-Fi icon on the printer's control panel will stop flashing and remain solid.
11. To verify the connection, you can print a network status sheet. Press the Home button, navigate to Setup, select Network Settings, and choose Print Network Status Sheet.
If you encounter any issues during the Wi-Fi setup process, please refer to the user's guide for troubleshooting steps or contact Epson customer support for further assistance.
Note: The above steps are a general guide and may vary slightly depending on the specific model and firmware version of your Epson ET-3600 printer. For detailed instructions, please refer to the user's guide provided with the printer.
Add New Comment