User Manual Q&AAnswer
Oct 29, 2024 - 05:36 AM
To connect the Canon MG4220 printer to your wireless network, follow these steps:
1. Make sure you have a network device such as a router or access point set up and ready.
2. Open the front cover and paper output tray of the printer.
3. Remove any orange tape and protective material from the printer.
4. Close the paper output cover.
5. Connect the power cord to the printer, but do not connect the USB cable yet.
6. Adjust the angle of the LCD screen and press the ON button.
7. Select your language and press the OK button.
8. When the setup screen is displayed, press the OK button.
9. If you want to use a wireless connection, select "Start setup" on the screen and follow the on-screen instructions.
10. If you prefer to use a USB connection or encounter difficulties with the wireless setup, select "Cancel for now" and proceed to the next step.
11. You can perform the network connection by following the instructions shown on your computer screen.
For more detailed instructions and troubleshooting, please refer to the Canon MG4220 Wireless Printer with Scanner User Guide.
Add New Comment