User Manual Q&AAnswer
Oct 29, 2024 - 03:34 AM
Calibrating the TORREY PZC5/10 scale is an important step to ensure accurate measurements. Here are the general steps to calibrate the scale:
1. Start by turning on the scale and allowing it to stabilize at room temperature for at least 30 minutes.
2. Press and hold the calibration button, which is usually labeled as "CAL" or "ZERO CAL." Refer to the user manual for the specific location of the calibration button on your model.
3. While holding the calibration button, the display will show a calibration value or prompt you to place a known weight on the scale. Follow the instructions on the display.
4. Place a known weight on the scale's platform. The weight should be within the scale's capacity range and known to be accurate. For example, you can use a calibration weight or a known weight from a reliable source.
5. Once the known weight is placed on the scale, release the calibration button. The scale will perform the calibration process and display the calibrated weight.
6. Remove the known weight from the scale and check if the scale now reads zero or displays the correct weight for other measurements.
It's important to note that the exact calibration process may vary slightly depending on the model and manufacturer. For detailed instructions specific to your TORREY PZC5/10 scale, please refer to the user manual provided with the product.
If you encounter any difficulties or have further questions about calibrating your scale, it is recommended to contact TORREY customer service for assistance.
Add New Comment