User Manual Q&AAnswer
Oct 29, 2024 - 03:16 AM
To connect the HP Engage Imaging Barcode Scanner II to your computer, please follow these steps:
1. Ensure that your computer is powered on and running the appropriate operating system (e.g., Windows).
2. Locate the USB cable included in the box with the barcode scanner.
3. Connect one end of the USB cable to the USB port on the barcode scanner.
4. Connect the other end of the USB cable to an available USB port on your computer.
5. Wait for your computer to recognize the barcode scanner. It may take a few moments for the necessary drivers to install.
6. Once the barcode scanner is recognized by your computer, it should be ready to use. You can test it by opening a barcode scanning application or software and scanning a barcode.
Please refer to the user guide provided with the product for more detailed instructions and troubleshooting tips. The user guide can be accessed using the link provided above.
Add New Comment