User Manual Q&AAnswer
Oct 29, 2024 - 02:32 AM
To set the time on your Sylvi Rig One Analog+Digital Watch, follow these steps:
1. In Time mode, press and hold button A for 3 seconds until you hear a “beep” sound. This indicates that you are now in Time Edit mode.
2. Use the C and D buttons to navigate through the local city options and select your desired city. Press button B to confirm your selection.
3. Choose between “ON” or “OFF” for DST (Daylight Saving Time) using the C and D buttons. Press button B to confirm your selection.
4. Select your preferred time format between “12H” or “24H” using the C and D buttons. Press button B to confirm your selection.
5. The seconds’ digits will be blinking. Use the C button to set them to “0.” Press button B to proceed.
6. The blinking digits now represent hours. Use the C and D buttons to adjust the correct hours. Once the hours are set, press button B.
7. The blinking digits now represent minutes. Use the C and D buttons to adjust the correct minutes. After setting the minutes, press button B.
8. To save the newly constructed time, press button A.
9. Once the digital settings are configured, the analog time will automatically align with the set parameters.
For more detailed instructions and visuals, please refer to the Sylvi Rig One Analog+Digital Watch User Manual provided in the link.
Add New Comment