How do I charge the NOCO BOOST GB70 2000A Lithium Jump Starter? (NOCO BOOST GB70 2000A Lithium Jump Starter Instruction Manual)

Answer

manuals.plus

Oct 29, 2024 - 01:32 AM


To charge the NOCO BOOST GB70 2000A Lithium Jump Starter, follow these steps:

1. Connect the GB70 using the included USB Charge Cable to the USB IN port and the USB car charger. It can also be recharged from any USB powered port, like an AC adapter, car charger, laptop, and more.

2. The USB IN port is rated at 2.1 Amps to ensure safe and efficient charging of the internal lithium battery.

3. The GB70 comes partially charged out of the box, but it needs to be fully charged prior to use.

4. The time to recharge a GB70 will differ based on the discharge level and the power source used. Actual results may vary due to battery conditions.

5. When recharging, the charge level of the internal battery is indicated by the Charge LEDs. The LEDs will slowly pulse 'On' and 'Off' and become solid until all four Charge LEDs are on.

6. When the battery is fully charged, the Green 100% LED will be solid, and the 25%, 50%, and 75% Charge LEDs will turn "Off". From time to time, the Green 100% LED will pulse indicating maintenance charging is occurring.

7. It is recommended not to charge and discharge the unit at the same time due to FCC regulations.

Note: Use the included USB Charge Cable and a NOCO 10W 12V power adapter for optimal charging. Using damaged cables or chargers, or charging when moisture is present, can result in electric shock. Using generic or third-party power adapters may shorten the life of your product and cause it to malfunction.