User Manual Q&AAnswer
Oct 28, 2024 - 11:25 PM
To set the alarm on the Capello CR10 Glow Clock, follow these steps:
1. Make sure the unit is in STANDBY mode.
2. Slide the ALARM 1 switch to the "SET" position. The default time of "12:00" will start flashing on the display, and the "ALARM 1" indicator will blink.
3. Use the TUNE / HOUR UP button to set the desired hour for the alarm, making sure to choose AM or PM correctly.
4. Use the TUNE / MIN DOWN button to set the desired minute for the alarm.
5. Slide the ALARM 1 switch to either the BUZZ or RADIO position to choose the alarm source.
6. The "ALARM 1" indicator on the display will turn solid, confirming that the alarm time has been set.
You can also set ALARM 2 by using the ALARM 2 switch and following the same steps mentioned above.
Note: The alarm volume is preset and cannot be adjusted. If an external audio device is connected to the AUX IN jack, the default alarm source is the buzzer.
For more detailed instructions and illustrations, please refer to the user manual provided with the product.
Add New Comment