User Manual Q&AAnswer
Oct 28, 2024 - 11:23 PM
To set the alarm on the Capello CR22 Sleep and Charge Dual Alarm Clock, follow these steps:
1. Press and hold the ALARM 1 or ALARM 2 BUTTON until the alarm time starts flashing on the display.
2. Use the TUNING UP / HOUR BUTTON to set the desired hour for the alarm and the TUNING DOWN / MIN BUTTON to set the desired minute.
3. Press the ALARM 1 or ALARM 2 BUTTON to confirm the alarm time setting.
4. Use the TUNING UP / HOUR BUTTON or TUNING DOWN / MIN BUTTON to select the desired alarm source: Radio or Buzzer.
5. Press the ALARM 1 or ALARM 2 BUTTON to complete the alarm setting. The ALARM 1 or ALARM 2 indicator will appear on the display.
Note: Before setting the alarm, make sure that the clock is set correctly. To set the clock, plug in the unit, press and hold the CLOCK SET BUTTON until the clock flashes, use the TUNING UP / HOUR BUTTON and TUNING DOWN / MIN BUTTON to set the hour and minute, and press the CLOCK SET BUTTON again to store the new clock setting.
For more detailed instructions and information, please refer to the Capello CR22 Sleep and Charge Dual Alarm Clock User Guide.
Add New Comment