User Manual Q&AAnswer
Oct 28, 2024 - 04:27 AM
Changing the nail drill bits on the PANA PNS-594 Electric Nail Drill Machine is a simple process. Here are the steps to follow:
1. Ensure that the nail drill machine is turned off and unplugged for safety.
2. Locate the Twist-Lock Chuck on the handpiece of the machine.
3. Hold the handpiece firmly and rotate the Twist-Lock Chuck counterclockwise to loosen it.
4. Once the Twist-Lock Chuck is loose, remove the current nail drill bit by pulling it out gently.
5. Select the desired nail drill bit from the set of interchangeable bits included with the machine.
6. Insert the chosen nail drill bit into the handpiece, making sure it is aligned properly.
7. Rotate the Twist-Lock Chuck clockwise to tighten it and secure the nail drill bit in place.
8. Give the nail drill bit a gentle tug to ensure it is securely fastened.
9. You can now proceed to use the nail drill machine with the newly attached drill bit.
It is important to ensure that the nail drill bit is properly secured before using the machine to prevent any accidents or damage. Always refer to the user manual for specific instructions and safety guidelines.
Add New Comment