Answer
Oct 28, 2024 - 03:23 AM
To connect the Arlo AC1001 doorbell to your existing doorbell wiring, follow these steps:
1. Set the chime switch: The chime switch is located inside the Arlo Audio Doorbell. Set the switch to position 2 if you have a mechanical chime or to position 1 or 3 if you have a digital chime. The correct switch setting depends on the type of chime you have.
2. Turn off the power: Turn off the power to your current doorbell at the breaker.
3. Remove the current doorbell: Remove your current doorbell from the wall.
4. Connect the wires: Connect the wires coming out of the wall to the terminals on the back of the Arlo doorbell battery cover using the screws provided. If the wires are too short, use the accessories provided.
5. Feed the wires back into the wall: Carefully feed the wires back into your wall.
6. Secure the battery cover: Secure the Arlo battery cover to the wall using the mounting screws.
7. Turn on the power: Turn the power back on at the breaker.
By following these steps, you should be able to connect your Arlo AC1001 doorbell to your existing doorbell wiring. For more detailed instructions and illustrations, please refer to the Arlo AC1001 Smart Home Security Audio Doorbell User Manual.
Add New Comment