User Manual Q&AAnswer
Oct 24, 2024 - 01:32 AM
Changing the nail drill bit on the DELIFO Electric Portable Nail File Drill is a simple process. Here's a step-by-step guide:
1. Unplug the sanding head: Before changing the nail drill bit, make sure the device is turned off and unplugged from the power source.
2. Remove the current nail drill bit: Gently twist and pull the current nail drill bit to remove it from the handpiece. Be careful not to apply excessive force to avoid damaging the device.
3. Select the desired nail drill bit: Choose the appropriate nail drill bit for your specific nail care task. The DELIFO Electric Portable Nail File Drill usually comes with a variety of interchangeable nail drill bits and attachments.
4. Insert the new nail drill bit: Align the shank of the nail drill bit with the opening in the handpiece. Insert the nail drill bit into the handpiece and push it in until it is securely in place.
5. Tighten the nail drill bit: Depending on the model, there may be a tightening mechanism on the handpiece. Use this mechanism to secure the nail drill bit in place. Ensure that it is tightened firmly but not overly tight to avoid damaging the device.
6. Test the nail drill bit: Before using the device, turn it on briefly to ensure that the nail drill bit is securely attached and functioning properly.
Please refer to the user manual that came with your DELIFO Electric Portable Nail File Drill for specific instructions and illustrations related to changing the nail drill bit.
Add New Comment