User Manual Q&AAnswer
Oct 23, 2024 - 03:49 AM
To charge the MORGLES X1S-HM Electric Nail Drill Cordless, follow these steps:
1. Plug in the USB charging cable provided in the box.
2. Connect the USB end of the cable to a suitable power source, such as a computer USB port or a USB wall adapter.
3. Connect the other end of the USB cable to the charging port on the nail drill.
4. The LED indicator on the nail drill will light up to indicate that it is charging.
5. Allow the nail drill to charge for the recommended time mentioned in the user manual. The charging time may vary depending on the battery level.
6. Once fully charged, the LED indicator will turn off or change color to indicate a full charge.
7. Disconnect the USB charging cable from the nail drill.
It is important to note that you should not use the nail drill while it is charging. Ensure that the device is unplugged from the power source before using it.
For more detailed instructions and safety precautions regarding charging, please refer to the user manual provided in the box.
Add New Comment