User Manual Q&AAnswer
Oct 19, 2024 - 02:15 AM
To clean the filter of the Makartt Rechargeable Nail Dust Collector Machine, follow these steps:
1. Turn off the nail dust collector and unplug it from the power source.
2. Open the dust collector by removing the cover or accessing the filter compartment.
3. Take out the used dust filter from the designated compartment.
4. Inspect the filter for clogs or excessive dust buildup.
5. If the filter is lightly clogged, you can clean it by gently tapping it against a hard surface to dislodge the dust. Alternatively, you can use a soft brush or a hairdryer on a cool setting to blow away the dust.
6. If the filter is heavily clogged or damaged, it is recommended to replace it with a new one. Refer to the user manual for instructions on filter replacement.
7. Once the filter is clean or replaced, insert it back into the designated compartment.
8. Close the dust collector by securing the cover or closing the filter compartment.
9. You can now resume using the nail dust collector with a clean filter, which should restore its suction power and efficiency.
Note: It is important to regularly inspect and clean the filter to maintain efficient dust collection. The frequency of cleaning or replacing the filter may vary depending on the frequency of use and the amount of dust generated during nail treatments.
Add New Comment