User Manual Q&AAnswer
Oct 18, 2024 - 03:17 AM
To adjust the steam flow on the Colorfarm MK-FS60 Ionic Hot Mist Face Steamer, follow these steps:
1. Turn on the device and wait for it to heat up (approximately 30 seconds).
2. Locate the steam control xxxx or button on the steamer. It is usually located near the steam nozzle or on the front panel of the device.
3. Depending on the design of the steamer, you may need to rotate the xxxx clockwise or counterclockwise to increase or decrease the steam flow. If there is a button, press it multiple times to cycle through different steam flow settings.
4. Start with a lower steam flow setting and gradually increase it to find the level that suits your preference and skin type. It is recommended to start with a lower steam flow for sensitive skin and gradually increase it for oily or congested skin.
5. Once you have adjusted the steam flow, position your face about 6-8 inches away from the steam nozzle and enjoy the soothing and hydrating steam for up to 15 minutes.
Please refer to the user manual for specific instructions and illustrations on how to adjust the steam flow on the Colorfarm MK-FS60 Ionic Hot Mist Face Steamer.
Add New Comment