User Manual Q&AAnswer
Oct 15, 2024 - 11:49 PM
To connect the RHINO BABAIN-180BL Smart Scale for Body to your device via Bluetooth, please follow these steps:
1. Activate the scale: Step onto the scale to activate it and ensure it is ready for pairing.
2. Enable Bluetooth on your device: Go to the settings of your device and turn on Bluetooth.
3. Open the Fitdays app: Launch the Fitdays app on your iOS or Android device.
4. Access the device pairing screen: Look for the Bluetooth icon or a "Pair Device" option within the Fitdays app. Tap on it to access the device pairing screen.
5. Put the scale in pairing mode: On the scale, press and hold the Bluetooth button until the Bluetooth icon starts flashing. This indicates that the scale is in pairing mode.
6. Pair the scale with your device: On the device pairing screen in the Fitdays app, select the RHINO BABAIN-180BL Smart Scale for Body from the list of available devices. Follow any additional prompts or instructions provided by the app to complete the pairing process.
7. Confirm successful connection: Once the scale is successfully paired with your device, you should see a confirmation message or indicator within the Fitdays app.
Note: It is important to ensure that your device is within range of the scale and that Bluetooth is enabled on both the scale and your device. If you encounter any difficulties during the pairing process, refer to the troubleshooting section of the user manual or contact customer support for further assistance.
Add New Comment