Answer
Oct 14, 2024 - 06:25 AM
To use the Vanity Planet VP59321-3400 Ionic Facial Steamer, follow these step-by-step instructions:
1. Before using Aira, make sure to fill it with distilled water only. Tap water can cause limescale buildup and shorten the device's lifespan. Do not use any oils or herbs instead of water.
2. Remove the water tank by unscrewing the plug. Slowly and carefully pour distilled water into the tank until it reaches the "Min." level but not higher than the "Full" mark. The "Full" mark provides enough water for a 15-minute session. Close the water tank and fasten the plug. Insert the water tank back into Aira until it clicks into place.
3. Wash your face before using Aira to enhance the detoxifying session's effectiveness.
4. Adjust the nozzle to your desired height. Note that you should only adjust the nozzle when the device is off to avoid the risk of burns or injury.
5. For a full spa experience, soak the foam portion of the Essential Oil Basket with your favorite essential oil. Place the basket on the device's nozzle. There are three baskets included to prevent the mixing of oils.
6. With Aira on a flat, secure, and water-resistant surface, plug in the AC adapter and press the Power Button. This will light the blue indicator light and start heating the distilled water.
7. After about one minute, steam made of nano-sized water molecules will begin to rise from the nozzle.
8. After two minutes, the steam will be ready for your detoxifying session. Close your eyes and move your face towards the plume of steam so that it covers your entire face. Make sure to maintain a distance of at least 25 centimeters from the nozzle to avoid burns or injury.
9. Aira will automatically shut off after 15 minutes or if the water tank is empty.
10. After your session, unplug the AC adapter and wash your face. Apply your favorite facial cream or mask to take advantage of your open and cleansed pores.
11. Allow Aira to cool for about 10 minutes before cleaning or storing it.
Remember to consult the user manual for additional safety precautions and maintenance instructions.
Add New Comment