Answer
Oct 12, 2024 - 05:07 AM
To calibrate the Fuzion PT3000 Digital Kitchen Scale, follow these steps:
1. Turn on the scale by pressing the "ON/OFF" key.
2. Wait until the LCD display shows zero.
3. Press and hold the "UNIT" key for a few seconds until the display shows "CAL".
4. Release the "UNIT" key and the display will show the calibration weight required.
5. Place the calibration weight on the platform and wait for the scale to stabilize.
6. Once the scale shows the calibration weight on the display, press the "UNIT" key to confirm the calibration.
7. The scale is now calibrated and ready for use.
Note: The calibration weight required for the Fuzion PT3000 Digital Kitchen Scale is not specified in the manual. Please refer to the manufacturer's instructions or contact Fuzion customer service for the appropriate calibration weight.
Add New Comment