Answer
Oct 12, 2024 - 05:06 AM
To calibrate the Fuzion EP Digital Postal Scale, please follow these steps:
1. Make sure the scale is powered off.
2. Press and hold the "MODE" button, and at the same time, quickly press the "TARE" button 4 to 5 times until the display shows "CAL". Then release the buttons.
3. The display will show a number. Press the "MODE" button to adjust the number to "20.0lb" or "0" depending on the unit of measure you prefer.
4. Place the required weight on the weighing platform. This weight should be the calibration weight specified in the user manual.
5. Press the "MODE" button again. The display will show "PASS" if the calibration is successful.
By following these steps, you can calibrate the Fuzion EP Digital Postal Scale and ensure accurate weight measurements.
Add New Comment