User Manual Q&AAnswer
Oct 12, 2024 - 04:46 AM
To connect the SUNER POWER 10W Solar Battery Charger to your 12V battery, follow these steps:
1. Place the solar panel in an area with direct sunlight, preferably on a window or a smooth surface using the provided suction cups.
2. Locate the output cable of the solar panel.
3. Connect the positive (+) terminal of the solar panel's output cable to the positive (+) terminal of your 12V battery.
4. Connect the negative (-) terminal of the solar panel's output cable to the negative (-) terminal of your 12V battery.
5. Ensure that the connections are secure and properly tightened to prevent any short circuits.
The built-in MPPT charge controller will automatically optimize the charging process based on the available sunlight. Please refer to the user manual for further instructions and safety precautions.
Add New Comment