User Manual Q&AAnswer
Oct 12, 2024 - 03:08 AM
To connect a backup camera to the Pioneer MVH-1400NEX, follow these steps:
1. Ensure that your vehicle has a compliant backup camera system. If your vehicle is equipped with a compliant backup camera that displays the backup view through the factory receiver, do not use the Pioneer receiver unless it is connected to and displays the same view as the factory backup camera. Please check with a qualified professional installer for installation options specific to your vehicle.
2. Purchase a backup camera and any necessary adapters. Not all vehicles may be able to connect, so it is important to check compatibility with a professional installer.
3. Connect the backup camera to the rearview camera input on the Pioneer MVH-1400NEX. The rearview camera input is labeled as "R.C. IN" on the back of the unit.
4. Connect the power supply for the backup camera. Refer to the power cord section of the installation manual for details on connecting the power supply.
5. Configure the settings on the Pioneer MVH-1400NEX for the backup camera. Refer to the Operation Manual for the correct setting. Make sure to set the "Back Camera Input" to "On" in the "Camera settings" when the rearview camera is connected.
Please note that proper installation and configuration of the backup camera may require professional assistance. It is recommended to consult with a qualified professional installer for installation options specific to your vehicle.
Add New Comment