User Manual Q&AAnswer
Oct 10, 2024 - 01:02 AM
To connect the J-Tech Digital JTECH-KVE2 4K USB KVM HDMI Extender, follow these steps:
1. Connect one HDMI cable between the source device and the TX Extender.
2. Connect another HDMI cable between the display device and the RX Extender.
3. Connect a single Cat6 cable between the TX and RX Extender. The maximum cable distance is 100 meters.
4. Connect the 5V/2A power supply to both the TX and RX units.
5. Plug the mouse and keyboard into the USB ports of the RX unit if you need the KVM control function.
6. Plug in the 3.5mm audio ports if you want to use earphones.
7. Turn on the LED indicator light. The power light should be red, and the yellow light in the RJ45 will flash when there is a signal input.
For a visual representation, refer to the connection diagram provided in the manual.
Please note that this is a general guide, and for more detailed instructions, it is recommended to refer to the complete user manual provided with the product.
Add New Comment