User Manual Q&AAnswer
Oct 10, 2024 - 12:42 AM
To assemble the AAOBOSI MGG-100 Meat Grinder Electric, follow these steps:
1. Hold the grinder head and insert it into the inlet, then fix the grinder head by using the fasten xxxx . Turn the xxxx clockwise to tighten it.
2. Insert the auger into the grinder head, with the long end going in first.
3. Place the cutting blade onto the auger shaft, making sure the blade is facing the front.
4. Place the desired grinding plate next to the cutting blade, aligning the protrusions of the cutting blade with the slot on the head.
5. Support or press the center of the grinding plate with one finger, then xxxx the cap clockwise with your other hand. Do not over tighten.
6. Place the food tray on the head and fix it into position.
7. Make sure to locate the unit on a firm surface and keep the air passage at the bottom and side of the motor housing free and unblocked.
For more detailed instructions, refer to the AAOBOSI MGG-100 Meat Grinder Electric Instruction Manual.
Add New Comment