User Manual Q&AAnswer
Oct 08, 2024 - 01:13 AM
To assemble the grinder, follow these steps:
1. Loosen the head locking/side xxxx enough to insert the grinding head onto the main unit. Tighten the head locking/side xxxx to stabilize the grinding head.
2. Insert the auger into the front of the grinding head with the short tip of the auger facing out.
3. Mount the cutting blade on the front of the auger, ensuring that the flat, sharpened end of the cutting blade is facing out.
4. Mount the grinding plate in front of the cutting blade, making sure the notch on the side of the grinding plate fits into the slot on the side of the grinding head.
5. xxxx the front grinding head xxxx cap onto the front of the grinding head, but do not over-tighten.
For a visual reference, please refer to the "Grinding Head Assembly" section on page 4 of the instruction manual.
Note: It is important to check that the cutting blade is inserted correctly before use. Incorrect assembly may result in improper grinding and damage to the grinder.
Add New Comment