User Manual Q&AAnswer
Oct 07, 2024 - 06:02 AM
Setting the timer on the HOLDRUBY CNL-WHITE-180W Fast Nail Dryer is simple and can be done using the digital display and buttons on the device. Here's a step-by-step guide:
1. Plug in the HOLDRUBY CNL-WHITE-180W Fast Nail Dryer and connect it to a power source using the provided power adapter.
2. Prepare your nails as usual, applying the desired gel nail polish.
3. Place your hand or foot inside the lamp's spacious interior.
4. On the digital display, you will see the timer options. The available timer settings are 30 seconds, 60 seconds, 90 seconds, and 120 seconds.
5. Press the corresponding button for the desired curing time. For example, if you want to set the timer for 60 seconds, press the "60s" button.
6. The lamp will automatically start when you insert your hand or foot, and the timer will begin counting down.
7. The lamp will turn off automatically when the selected curing time is complete.
8. After the curing process is finished, your nails should be fully cured and ready for further nail art or finishing touches.
Note: Make sure to follow the recommended curing times for the specific gel nail polish or product you are using. Refer to the user manual for any additional guidance or specific instructions for your nail dryer model.
Add New Comment