User Manual Q&AAnswer
Oct 07, 2024 - 04:31 AM
To select the appropriate curing mode and timer settings on the BOLASEN SYL-i2 Portable Fast Curing Lamp, follow these steps:
1. Plug in the lamp and connect it to a power source using the provided power adapter.
2. Prepare your nails as usual, applying the desired nail gel polish.
3. Place your hand or foot inside the lamp's spacious interior.
4. Look at the LCD display on the lamp. It will show the current mode and timer settings.
5. To change the curing mode, press the mode button on the lamp. Each press will cycle through the available modes. Refer to the user manual for specific mode options and their corresponding symbols on the display.
6. Once you have selected the desired mode, press the timer button to adjust the curing time. Each press will increase the time by a certain increment. Again, refer to the user manual for the specific time options and their corresponding symbols on the display.
7. After selecting the appropriate mode and timer settings, the lamp will automatically start when you insert your hand or foot. It will turn off when the selected curing time is complete.
Note: It is important to refer to the user manual for specific mode and timer options, as they may vary depending on the model of the BOLASEN SYL-i2 Portable Fast Curing Lamp.
Add New Comment