Answer
Oct 07, 2024 - 04:14 AM
Setting the timer on the RAYOCON SUN-X5 120W Smart LED UV Nail Light is easy. Here's a step-by-step guide:
1. Plug in the nail light and connect it to a power source using the provided power adapter.
2. Prepare your nails by applying the desired gel nail polish.
3. Place your hand or foot inside the lamp's spacious interior.
4. On the control panel of the nail light, you will find the timer settings. These settings allow you to choose the appropriate curing time for your gel nail polish.
5. Use the buttons or touch controls on the control panel to select the desired curing time. The available options may vary, but typically range from 10 to 99 seconds.
6. Once you have selected the desired curing time, the lamp will automatically start when you insert your hand or foot. It will turn off automatically when you remove it.
7. After the curing process is complete, your gel nail polish should be thoroughly cured and dry.
Please refer to the user manual for specific instructions and illustrations related to the timer settings of the RAYOCON SUN-X5 120W Smart LED UV Nail Light.
Add New Comment