Answer
Oct 07, 2024 - 03:02 AM
Adjusting the timer settings on the Easkep 86W UV LED Nail Lamp is simple. Here's a step-by-step guide:
1. Plug the nail lamp into a secure electrical outlet.
2. Once the lamp is powered on, you will see the default timer setting displayed on the LCD screen.
3. To change the timer setting, press the timer button on the control panel. Each press will increase the timer duration by 10 seconds.
4. Continue pressing the timer button until you reach your desired timer duration. The available timer options range from 10 seconds to 99 seconds.
5. Once you have selected the desired timer duration, the lamp will automatically start the curing process when you insert your hand or foot.
6. After the selected timer duration has elapsed, the lamp will automatically turn off.
It's important to note that the appropriate timer setting may vary depending on the gel polish type and curing preferences. Refer to the gel polish manufacturer's instructions for recommended curing times.
For further information or troubleshooting, please consult the user manual provided with the Easkep 86W UV LED Nail Lamp.
Add New Comment