User Manual Q&AAnswer
Oct 07, 2024 - 02:47 AM
To select the appropriate timer setting on the Vishine 36W UV LED Nail Dryer Lamp, follow these steps:
1. Identify your gel polish type: Determine whether your gel polish requires UV or LED curing. Most gel polishes will specify this information on the packaging or in the product instructions.
2. Refer to the gel polish manufacturer's recommendations: Check the gel polish instructions or the manufacturer's website for the recommended curing time. They may provide specific guidance on the optimal timer setting for their product.
3. Understand the timer options: The Vishine Nail Dryer Lamp offers four preset timer modes: 10s, 30s, 60s, and 99s. Each mode corresponds to a different curing time.
- 10s: This short timer setting is suitable for quick touch-ups or for curing thin layers of gel polish.
- 30s: This medium timer setting is commonly used for most gel polishes and provides a balance between curing time and efficiency.
- 60s: This longer timer setting is ideal for thicker layers of gel polish or for gel polishes that require more curing time.
- 99s: This low heat mode is designed for sensitive nails or for gel polishes that require a slower curing process. It gradually increases the power over time to prevent heat spikes.
4. Select the appropriate timer setting: Based on your gel polish type and the manufacturer's recommendations, choose the timer setting that aligns with the suggested curing time. Press the corresponding timer button on the lamp to activate the desired setting.
5. Start the curing process: Once you have selected the timer setting, place your hand or foot inside the lamp. The lamp will automatically start when it detects your hand or foot. The countdown timer will display on the LCD screen, indicating the remaining curing time.
6. Finish the curing process: The lamp will automatically turn off once the selected timer has elapsed. Remove your hand or foot from the lamp, and your gel polish should be fully cured and hardened.
Note: It is important to follow the gel polish manufacturer's instructions for optimal results. If you experience any issues with the curing process, such as uneven curing or gel not curing properly, refer to the troubleshooting section in the user manual or contact the manufacturer for further assistance.
Add New Comment