Answer
Oct 05, 2024 - 01:05 AM
Here are the step-by-step instructions for assembling and operating the La Reveuse LARB1802S Personal Smoothie Blender:
1. Take out the blender and remove all packaging material and labels from the appliance.
2. Wash the lids, cups, and blades assembly in warm, soapy water with a soft cloth. Be careful when washing the blades assembly, as the blades are sharp.
3. Rinse and dry thoroughly.
4. Place the motor base on a clean, dry, level surface such as a counter or tabletop.
5. Ensure that the blender is unplugged from its power source.
6. Take a cup and fill it with ingredients up to the max fill line.
7. Place the blades assembly onto the cup and twist it on tightly until you have a good seal.
8. Turn the cup upside down and place it onto the motor base, aligning the tabs on the cup with the motor base. Turn it clockwise to lock it in place.
9. Plug in the blender and press down on the top of the cup in short intervals to activate the blending process.
10. When you have reached your desired consistency, stop the appliance by removing your hand from the cup. Wait for the motor to stop running.
11. Turn the cup counterclockwise and pull it straight up to remove it from the motor base.
12. Remove the blades assembly by twisting it counterclockwise.
13. Place the Sip & Seal lid onto the cup, twist it to seal, and enjoy your smoothie!
Remember to always unplug the motor base when not in use and follow the safety guidelines provided in the user manual.
For more information and troubleshooting tips, please refer to the La Reveuse LARB1802S Personal Smoothie Blender User Guide.
Add New Comment