User Manual Q&AAnswer
Oct 01, 2024 - 01:34 AM
The setup process for the Yesker YSK-035 Selfie Ring Light is straightforward. Here are the step-by-step instructions:
1. Attach the ring light to the tripod: xxxx the ring light onto the top of the tripod by aligning the threads on the bottom of the ring light with the tripod's mounting xxxx .
2. Connect the USB cable: Plug one end of the included USB cable into the USB port on the ring light. The USB port is located on the side of the ring light. Plug the other end of the USB cable into a power source such as a computer, laptop, power bank, or USB wall charger.
3. Secure your smartphone: Use the adjustable phone holder to secure your smartphone in place. The phone holder can accommodate smartphones with a width of 2 to 4 inches.
4. Adjust the tripod height: Extend or retract the tripod legs to adjust the height according to your preference. The tripod has three sections with quick clip locks for easy height adjustment.
5. Position the ring light: Adjust the angle of the ring light by tilting it up or down. This allows you to direct the light towards your desired subject.
6. Select the desired lighting options: The ring light offers three color temperature options - white, warm white, and warm yellow. Use the color switch buttons or control panel on the ring light to switch between the different color temperatures. Additionally, you can adjust the brightness level using the brightness control buttons or panel.
7. Start using the ring light: Once you have set up the ring light and adjusted the lighting options, you are ready to start using it for photography, videography, or live streaming. Use the included selfie remote to capture photos or start/stop video recording from a distance.
Please refer to the Yesker YSK-035 Selfie Ring Light user manual for more detailed instructions and troubleshooting tips.
Add New Comment