User Manual Q&AAnswer
Sep 26, 2024 - 03:24 AM
To set the time and date on the SHARP SPC946 Jumbo Display Digital Wall Clock, follow these steps:
1. Insert batteries into the wireless sensor.
2. Insert the backup batteries into the clock (optional) and plug the clock into a power outlet.
3. Press and hold the SET button on the clock for 2 seconds.
4. Use the V/A buttons to set the hour. Press the SET button to confirm.
5. Use the V/A buttons to set the minute. Press the SET button to confirm.
6. Use the V/A buttons to set the year. Press the SET button to confirm.
7. Use the V/A buttons to set the month. Press the SET button to confirm.
8. Use the V/A buttons to set the day. Press the SET button to confirm.
9. Use the V/A buttons to select between °C/°F temperature display. Press the SET button to confirm.
10. Press the SET button again to save and exit the setting mode.
Note: The day of the week will automatically set based on the calendar settings. If nothing is pressed for 10 seconds, the clock will automatically save and exit from the setting mode. You can also press and hold the SET button for 2 seconds to rapidly change values.
For more detailed instructions and illustrations, please refer to the SHARP SPC946 Jumbo Display Digital Wall Clock User Manual.
Add New Comment