User Manual Q&AAnswer
Sep 20, 2024 - 11:52 PM
To set the time on the SHARP SPC1203 LED Digital Alarm Clock, follow these steps:
1. Begin by plugging in the AC power cord into a standard household outlet.
2. The display will flash, indicating that it needs to be set.
3. Press and hold the TIME SET button down to activate time setting.
4. While holding down the TIME SET button, press the HOUR button to advance to the correct hour. The PM indicator will light when the hour is advanced into the PM time.
5. While holding down the TIME SET button, press the MINUTE button to advance to the correct minute.
6. Release the TIME SET button when the correct time is shown on the display.
Note: Be careful when setting the time. The PM indicator dot will appear in the upper left corner of the display when the time is past 11:59 AM.
For more detailed instructions and illustrations, please refer to the SHARP SPC1203 LED Digital Alarm Clock User Manual. You can download the manual in PDF format from the provided link.
Add New Comment