User Manual Q&AAnswer
Sep 20, 2024 - 10:59 PM
To set the alarm on the SHARP SPC729 Bluetooth Alarm Clock Radio with USB Port, follow these steps:
1. Press the ALARM 1/2 button to select the alarm you want to set (Alarm 1 or Alarm 2). The selected alarm mode will light up.
2. Press and hold the TIME SET button to activate the time setting mode.
3. While holding down the TIME SET button, press the HOUR button to advance to the correct hour. The PM indicator will light when the hour is advanced into the PM time.
4. While holding down the TIME SET button, press the MIN button to advance to the correct minute.
5. Release the TIME SET button when the correct alarm time is shown on the display.
The alarm (beep or radio) will come on at the set time. To stop the alarm, press the /FM/OFF or ALARM 1/2 button, and the alarm will sound again the next day. If you want to turn off the alarm completely, press the ALARM 1/2 button until the alarm indicator disappears from the front display.
Note: The beep alarm volume is fixed and cannot be adjusted, but the radio alarm volume can be adjusted using the VOLUME buttons. To wake up to a radio station, refer to the section on "LISTENING TO THE RADIO" in the instruction manual.
Please refer to the instruction manual for more detailed information and illustrations.
Add New Comment