User Manual Q&AAnswer
Sep 18, 2024 - 05:23 AM
To set the time and date on the SHARP SPC452 AccuSet LCD Alarm Clock, follow these steps:
1. Slide the LOCK switch at the back of the clock to the TIME position.
2. Press and hold the SET button for 2 seconds. The year will start flashing.
3. Use the UP and DOWN arrow buttons to set the correct year. Press the SET button to confirm.
4. The month will flash. Press the SET button to confirm.
5. The date will flash. Press the SET button to confirm.
6. The language will flash. Press the SET button to confirm.
7. The hours will flash. Press the SET button to confirm.
8. The minutes will flash. Press the SET button to confirm.
9. Return to the battery compartment and slide the TIME switch to LOCK.
10. Repeat the same procedure for setting the alarm by using the ALARM SET button on top of the clock.
11. Make sure the TIME button is set to SET when setting the alarm or time.
Please refer to the SHARP SPC452 AccuSet LCD Alarm Clock User Manual for more detailed instructions and illustrations.
Add New Comment