User Manual Q&AAnswer
Sep 18, 2024 - 04:32 AM
To set the time on the SHARP SPC235 Digital Alarm Clock, follow these steps:
1. Plug in the power cord into a standard household outlet. The display will flash, indicating that it needs to be set.
2. Press and hold the TIME button to activate the time setting.
3. While holding down the TIME button, press the HOUR button to advance to the correct hour. The PM indicator will light up when the hour is advanced into the PM time.
4. While still holding down the TIME button, press the MIN button to advance to the correct minute.
5. Release the TIME button when the correct time is shown on the display.
The clock is now set to the correct time.
Note: If the power is interrupted, the battery backup will maintain the time settings. However, if there is no battery and the power is interrupted, the display will flash 12:00 and the alarm and time will need to be reset.
For more detailed instructions and information, please refer to the SHARP SPC235 Digital Alarm Clock USB Port User Manual.
Add New Comment