Answer
Sep 18, 2024 - 02:30 AM
To clean the Aspectek bug zapper, follow these steps:
1. Regularly check and clean the removable tray at the bottom of the unit to dispose of dead insects. This tray is designed to collect the dead insects for easy cleaning.
2. Remove the tray from the bug zapper by sliding it out from the designated slot or opening. Be careful not to spill the contents while removing the tray.
3. Wash the tray with warm soapy water to remove any debris or residue left by the dead insects. Use a mild dish soap or detergent and a sponge or cloth to clean the tray thoroughly.
4. Rinse the tray with clean water to remove any soap residue.
5. Dry the tray completely before placing it back into the bug zapper. Make sure there is no moisture left on the tray to prevent any potential damage to the device.
6. Once the tray is dry, slide it back into the bug zapper until it is securely in place.
Note: When cleaning the electric grid, ensure the device is switched off and unplugged before attempting any cleaning. Use a brush or a dry cloth to remove any debris from the grid. Do not use water or any liquid on the electric grid.
By regularly cleaning the removable tray and keeping the bug zapper free from debris, you can maintain its efficiency in attracting and eliminating flying insects.
Add New Comment