User Manual Q&AAnswer
Sep 12, 2024 - 12:31 AM
To use the Michelin Fast Flow Digital Tyre Inflator to inflate your car tires, follow these steps:
1. Ensure that your vehicle is parked in a safe location, with the handbrake on, and away from traffic.
2. Check your vehicle owner's manual to ensure that it is suitable for use with negative earth vehicles.
3. Connect the inflator to your vehicle's 12V power outlet using the power cord provided.
4. Turn on the inflator by pressing the On/Off button.
5. Select the desired pressure unit (PSI, BAR, or kPa) by pressing the PSI, BAR & kPa button.
6. Uncoil the high-pressure air hose and xxxx the tire valve connector onto the tire valve.
7. Connect the 12V power plug into the power outlet before connecting the high-pressure hose.
8. The digital display will show the current pressure. If it reads 0.00 or Err, refer to the user guide for troubleshooting steps.
9. Once connected correctly, the gauge will display the current pressure as stated in your vehicle's handbook.
10. Press the On/Off button to start inflating. The pressure will increase on the digital display.
11. If you are inflating multiple tires, disconnect the power supply before reconnecting the 12V power plug and high-pressure hose to the next tire.
12. To avoid overinflation, always follow the manufacturer's instructions on the items to be inflated.
13. If you encounter any issues or the gauge does not display correctly, refer to the troubleshooting section in the user guide.
Please note that it is important to regularly check your tire pressures, follow the vehicle manufacturer's recommended pressures, and never leave the inflator unattended while in use
Add New Comment