User Manual Q&AAnswer
Sep 10, 2024 - 12:08 AM
To set the time on the SHARP SPC476 AccuSet Digital Alarm Clock, please follow these steps:
1. Before plugging in the power cord, slide the TIME ZONE switch to the correct time zone (EST, CST, MST, or PST).
2. Slide the DST switch to the appropriate position for your area (ON or OFF).
3. Once the above steps are completed, plug in the power cord into a standard household outlet. The clock will fast forward to the correct time.
4. If you need to manually set the time, press and hold the TIME button down to activate time setting.
5. While holding down the TIME button, press the HOUR button to advance to the correct hour. The PM indicator will light when the hour is advanced into the PM time.
6. While holding down the TIME button, press the MIN button to advance to the correct minute.
7. Release the TIME button when the correct time is shown on the display.
Note: The clock will automatically adjust for daylight saving time if the DST switch is set to ON.
For more detailed instructions and illustrations, please refer to the SHARP SPC476 AccuSet Digital Alarm Clock User Manual.
Add New Comment