User Manual Q&AAnswer
Sep 10, 2024 - 12:02 AM
To set the time on the SHARP SPC033 Large LED Alarm Clock, follow these steps:
1. Plug in the power cord into a standard household outlet. The display will flash, indicating that the time is ready to be set.
2. Press and hold the TIME button to activate time setting.
3. While holding down the TIME button, press the HOUR button to advance to the correct hour. The PM indicator will light up when the hour is advanced into the PM time.
4. While still holding down the TIME button, press the MINUTE button to advance to the correct minute.
5. Release the TIME button when the correct time is shown on the display.
6. If the time is set past 11:59 A.M., the PM indicator will appear on the upper left corner of the display.
Note: Make sure to set the time accurately, as the PM indicator will affect the alarm time setting as well.
For more detailed instructions and illustrations, please refer to the SHARP SPC033 Large LED Alarm Clock User Manual.
Add New Comment